I love traveling, and San Fransisco Bay is my favorite place. But when I am home, i am always concern about my wireless router.
Maybe it’s not easy, but it’s not very difficult. When you purchase a new PC, you just set it up, and it’s same you must do of your home router or best ethernet switch for gaming. You should note that new routers come with clearly labeled ports, as color codes make it easy for users to connect everything and we find it in some cases. Mesh-based Wi-Fi systems such as Eero and Google Wi-Fi, which are geared for ease of use extreme, offering a fast and seamless application-based setup that networking manufacturers are aiming to make things simpler.
Do everything right, but you have to make sure everything works fine especially the performance and network security. There is a question that may be related to our discussion this time, how many devices can connect to a router? There are multiple factors to explain about it, Such as How Many Access Points? Theoretical Limits of Wi-Fi Network Scaling, Practical Limits of Wi-Fi Network Scaling, and the last Don’t Forget to Optimize Your Wireless Router! In this article, we will focus on how to optimize your wireless Router. There are several necessary steps you need to follow to configure your wireless router correctly and optimum router settings and connectivity.
Choose best wireless router for your home. How old is your router? If your router is relatively new, you will not need to upgrade to new hardware. However, if your router is more than a few years old and only support WEP for security, then you should improve it. Choose the best router by reading some references. You should be careful with an example; some ISPs even charge extra if you want to use specific features. For example, Spectrum (formerly Time Warner Cable) in New York picked up users to turn on the router’s internal Wi-Fi network. Unfortunately, you have to buy your router.
After successfully selecting the router, now you need to connect it and online. When your service provider gives you a modem, and they activate your internet service, this is pretty simple. Just follow these steps:
Most consumer routers are set to use DHCP and automatically assign IP addresses to your computer. When everything goes well, you should now be online. You will experience a little more complicated. If you use a router provided by the ISP and not the modem. First, you reconfigure your ISP router to operate in bridge mode before you connect it to your new router. The bridge mode means the old router is not doing anything to network traffic and just passing it on to your new router for processing. Some providers will do it for you remotely after you make the request.
Next, you can now start customizing the router configuration with the router and the PC connected physically. We know that most routers today are managed via a web browser or mobile app and sent using the default IP address, administrator account, and password. From vendor to vendor this default IP address will vary so check your documentation to find your own. Once you have that information, next accessing the management console is easy.
The important thing for you to do is change the default password of the router. It is done to maintain the security of your network. Next, make sure your router is running the latest firmware released by the manufacturer. This is done because you never know how long a product has been stored on the shelf before it gets into your hands and firmware updates can overcome many potential problems before you meet them.
In this step, we focus on your router’s LAN configuration. DHCP, which manages all IP addresses in your network, is usually enabled by default in most consumer routers. Remember, individual devices, such as servers and printers, must always have the same IP address. They can’t change their address occasionally. On the off chance that you are in that circumstance, you have to allocate a static IP address, an IP address that has never been entered in a DHCP collection and assigned to the device permanently. To make a static IP address available, we exclude multiple IP addresses from the DHCP scope so they can be manually assigned. To set the DHCP scope, follow these steps:
You already have multiple IP addresses, in this step, you must provide your device network adapter with a unique IP address, Subnet Mask network, Gateway address, and DNS server address. You can use any address between 192.168.0.52 and 192.168.0.254 for IP addresses and 255.255.255.0 for Subnet Mask. Gateway and DNS addresses are the same as the router’s IP address; i.e., 192.168.0.1. Keep a rundown of the static IP addresses you have set so that you cannot use them again by mistake.
Talk about security, many routers support Wi-Fi Protected Setup or WPS, and this is a network security standard to secure home networks easily through keystrokes. Disable. Another step you can take to add security is that you can disable SSID from broadcasting. This will hide your system from all wireless devices, including yours. You must manually enter the SSID into each device to connect to your system. The wireless configuration screen can include the option to enable the guest network. But this depends on your router. The Guest Network allows visitors to your home to go online while isolating them from the rest of the devices on your network.
The ability to share network resources is one of the most important aspects of home networking. There are various ways besides using servers such as NAS (Network Attached Storage) devices, having built-in USB ports, Windows PCs and the simplest and easiest to set up is The Homegroup.